Presenting the FireLuke Tank by FreeMax Vape, a new sub ohm tank that will blow your mind! This little beauty comes packed with all of the best features and everything you could ever want from a tank, including style.
The FreeMax FireLuke is made of resin and stainless steel, combining a beautiful look with a sturdy design. Freemax has even gone so far as to make the resin tanks in two different finishes: gloss and matte. It's a top fill tank with massive bottom airflow and a smooth airflow control. The tank comes with a “bubble” glass that will give you a 5ml juice capacity, and a second glass with a slightly different shape that holds 4mls of juice. The FireLuke is a 25mm tank (at the base), 32mm wide with the 5ml tank, and 28mm wide with the 4ml tank. At only 54mm tall (or short) it appears smaller than other tanks like the Smok TFV8 while still holding as much or more juice.
The FireLock coils for the FireLuke work really well with high VG juices and are available in these options: 0.15ohm sextuple coil (included), an RTA deck (included), as well as these that are sold separately: 0.15ohm duedenary coil, 0.15 dual vertical coil, and 0.25 dual vertical coil. The coils have amazing ranges from 60W to 180W, depending on what coil you are using. The flavor, vapor production, and airflow for this tank come together to create an amazing vape experience.
The FireLuke FreeMax is stunning in its resin covered glory but also perfect for flavor chasers and cloud chasers alike!
Note: Products made of resin may vary from the product shown, though these are much more consistent than many other resin products.
- Size: 54mm x 25mm*
- Material: Stainless Steel + Resin
- Capacity: 4ml or 5ml
- Suggested Wattage: 60-180W
- Airflow: Dual 14mm x 3.5mm
- Sextuple Kanthal Coil: 0.15ohm (60-140W)
- RTA: 2 Post with 4, 2.5mm terminals
- Gold Plated 510 Pin
- Colors Include: Black, Red, Yellow, Green, Blue, Black, & Purple
- Available in Matte and Gloss Finish
- Huge Top Fill Slots
- 2 Glass Tank Sizes
- Max Wattage of 180W
- Large Airflow Control
- Organic Cotton Coils
- Removable FireLuke Drip Tip
What's in the Box
- 1 x FreeMax FireLuke Sub-Ohm Tank
- 1 x 0.15 Sextuple Coil (installed)
- 1 x 5ml Glass Tank (installed)
- 1 x RTA Deck
- 1 x 4ml Glass Tank
- 1 x Proprietary Drip Tip
- 1 x Pair Prebuilt Clapton Coils
- 1 x Flathead Screwdriver
- Organic Cotton
- Replacement O-rings
- Replacement Screws
- User Manual
When you receive your FreeMax Fireluke Sub-Ohm Tank, be sure to completely take it apart before filling for the first time. From the factory, the top cap is usually put on super tight, so you’ll want to make sure you get these two pieces apart before reassembling it.
When putting your top cap back on after filling, you only need to snug the cap down, rather than tightening it fully. The cap and tank seal really well, so no need to screw it down too hard; otherwise, the pieces of the top of the tank get stuck together, and it can be messy to get them apart again.
- We've also learned a trick to filling these tanks. If you simply fill it and pop the cap on it, the pressure will push juice into the coil. Sometimes this results in a little spit back when vaping it. But try this trick and it shouldn't be a problem. Fill the tank with juice, put the cap on loosely, maybe just a turn or two, turn the tank upside down and finish screwing the cap on. What this does is allow air to be pushed through the coil instead of your juice.
Unlike some other tanks, the 510 contact pin in this tank does not slide in and out on its own, so be sure that your coil is screwed in all the way or you might get a “no atomizer” error.
However, the 510 contact pin on the Fireluke Vape is adjustable so you can use a small screwdriver to set it where you need, like if you want to use it on a mech - and yes, it works pretty well!
Priming the Firelock coils in the Fireluke is a breeze. We’re not sure what they’ve done, but they wick extremely well. Fill it up, let sit for 5-10 minutes, and you’re good to go! You can even speed up the process by closing the airflow all the way and then drawing air through (don’t fire your mod while doing this), or you can just screw and unscrew the top cap several times - this forces juice into the coil with a little air pressure. Either of those ways will cut priming time by more than half.
As you might notice, the drip tip is removable, although it’s a very obscure size, but did you know you can use a 510 drip tip on it? Yep, the center hole when the big drip tip is removed is the perfect size to pop a 510 drip tip in. Removing the o-ring will make it look a little better, if you decide to do this. I also found that the ceramic drip tip from the Congrevape Dogetank fits in place of the drip tip that comes with the Fireluke.
The RTA deck included with your Fireluke works pretty well, too. When wicking the RTA, I’ve found it’s best to trim the tails of your wicks so that they just barely stick down into the juice wells, like maybe 2mm, making sure they fill out the juice wells from side to side to block excess juice from getting in.
VapeWild’s Thoughts and Review
The FireLuke Tank is a brilliant tank! Our favorite thing about this tank is that it has the ability to transform into a new vaping experience every day, along with the ability to grow with you. You can transform this tank by changing the glass or coils to create a different vape whenever you just want to change it up a bit. If you are new to vaping or are looking for a tank that can grow with you, this is it. The FireLuke comes with an RTA coil/deck in the box so you can learn how to build (if you don’t know how) or you can use prebuilt coils as well. The RTA deck is one of the best RTA decks we have seen on a tank and it's included… bonus!!! The FireLuke by FreeMax is a sturdy yet beautiful tank, it's popular around the office, and we are sure you will love it just as much as we do!