Pre-Built Vape Coils for RDAs, RTAs, and RDTAs

Gunky coils on your RDA getting you down? Grab a new set of premade coils and get back to vaping in no time! You’ll find a wide array of vape coil builds below to select from along with premium cotton wicks!

Vapefly Firebolt Cotton - 20 pack

The VapeFly Firebolt Cotton for your rebuildable atomizers has landed with quite the entrance. This cotton is the solution to wicking your RDA coils with ease. Search no more for the perfect wick, you just found it! The VapeFly Firebolt Cotton is 100%...

Add to Wish list
Framed Staple Clapton Pre-Built Coil (0.1 ohm) Framed Staple Clapton (0.1 ohm)

Framed Staple Prebuilt Coil by Aleaf

Get ready for low ramp time and big flavor with Aleaf Framed Staple Coils! Framed Staples consist of multiple ribbon wires framed out by round wire and wrapped by a single high gauge wire. These prebuilt coils are a clapton/staple hybrid meant to give...

$8.99 $4.99
Add to Wish list
Aleaf Staple Handmade Pre Built Coils Staple Coil

Staple Prebuilt Coil by Aleaf

Introducing the next staple of your vaping game, the Aleaf Handmade Staple Coils! When you are vaping for cloud chasing, these are the pre built coils designed for you! A staple coil has multiple ribbon wires at their core wrapped with a high gauge wire...

$7.99 $5.99
Add to Wish list
Handmade Alien Pre Built Coils Alien Clapton Coils

Alien Prebuilt Coil by Aleaf

Featuring the Aleaf Alien Coils! These prebuilt coils are handmade and designed for the flavor chaser in you! Enjoy the fullest flavor you can and vape your way to otherworldly production! Alien coils have multiple cores wrapped by the outer wire of a...

$7.99 $5.99
Add to Wish list
Framed Staple Alien Coils Framed Staple Alien Coils  - 0.1 Ohm

Framed Staple Alien Prebuilt Coil by Aleaf

Introducing the Aleaf Handmade Framed Staple Alien coils! A Framed Staple Alien Coil is a pre-built coil that has multiple ribbon wires framed by round wire and then wrapped with a de-cored Clapton outer wire which creates a wave aesthetic. This is...

$7.99 $6.99
Add to Wish list

OFRF nexMESH Mesh Coils

Take your Profile RDA or any mesh RDA to the next level with OFRF nexMESH Mesh Coils! Each one of these mesh coils is made from high-quality A1 Kanthal that is 3 times the density of Wotofo’s mesh coils. With a large surface area coupled with the...

Add to Wish list
Vape Cotton Japanese Organic Vape Cotton

Japanese Organic Cotton

This organic Japanese cotton offered by VapeWild is authentic and unbleached. Each single vape cotton pad is finely threaded to maintain long continuous cotton fibers and available for use in any rebuildable atomizer. Sold in quantities of four sheets...

$0.99 $0.79
Add to Wish list

Pre-Built Vape Coil Buying Guide

Trying to find a coil that works for your vape? Here are some different kinds of pre-built coils for sale that you have to choose from. Read through this section and find out which coil is going to be best for you and your rebuildable atomizer!

Coils for an RDA

Any coils in the above selection will work perfectly with an RDA! There are a few things you need to look for to make sure they will be a good fit:

  • The post holes of your RDA are big enough
  • The deck’s diameter will fit the coil
  • You’re using a device that can handle the resistance of the pre-made coil(s)

Checking those boxes may seem like a daunting task, but it really isn’t!

As long as your RDA’s post holes are 3mm or bigger it should fit ANY coil from our selection. If your RDA’s post holes are smaller than 3mm, it will likely be best to pick a coil that has a smaller width like a clapton or fused clapton coil.

Making sure the deck’s diameter will fit the coil is easy too! Most RDAs that have been released recently have a fairly large deck. A deck larger than 24mm will surely fit your coils. If your deck is smaller, as long as it’s a single coil RDA, the pre-made coils will likely still fit as well!

To make sure you device can handle a resistance of the vape pre-built coils you’re getting, just check the specifications on the mod for its minimum resistance. This information should be widely available. If you are using 2 coils, remember the coils resistance will be half of what a single coil will be.

Coils for an RTA

When looking for coils for your vape RTA, you’ll use the same techniques described above to determine if the pre-built coil will be a good fit. On top of that, it’s always good to look for a coil that has a lot of surface area for an RTA. This is because the surface area in a pre-built coil determines the level of flavor it will produce and RTAs typically produce slightly less flavorful vapor than an RDA.

So when looking for your next favorite premade coil, look for more complex build like staggered fused claptons, alien coils, and framed staple coils.

Low Resistance Pre-Built Coils

Most pre-built coils offered are going to have a low resistance. This will help produce a lot more vapor and will be utilized at higher wattages.

Low resistance pre-made coils are less than or equal to 0.2 ohms per coil, so this means when they are used in tandem, the resistance is cut in half.

Whenever using a coil with such a low resistance, make sure your vape device is capable of withstanding that resistance. It is always a good idea when vaping with rebuildable atomizers to also familiarize yourself with Ohm’s Law.

Pre-Built Coils for Mechanical Mods 

When on the hunt for a great set of pre-built coils for your mechanical mod, make sure you're paying attention to the resistance of your coils. A resistance that is too low may cause the mechanical mod, which has no safety features, to short circuit. Make sure you're using high quality vape specific batteries with a high amperage.  Make sure those batteries can handle your end resistance and use an Ohm Reader often to double check!

Need help? We're available at (844)-328-9445 Email us at or use Live Chat!

Stay Connected