VooPoo Drag 2 177W Starter Kit

The Voopoo Drag 2 Kit is an update to the immensely popular Drag. The Voopoo Drag 2 has a max watt range of 177w. This kit also comes with the UForce T2 Tank making this kit quite the 1-2 punch. What really stands out is how ergonomic the device is, which is a marked improvement from the original.

The full wattage range of the device is 5w-177w giving you plenty of power to find what works for you. It also has a resistance range of .05 - 5.0 ohms in power mode and a 0.05-1.5 ohms in temp mode, meaning the Drag 2 can host a wide array of coil types. As usual with Voopoo flagship devices, this mod comes with several modes: Power Mode, TC Mode, and Custom Mode. A new addition to the mode list is Fit Mode.FIT Mode is designed specifically for sub-ohm tanks to prevent fast coil burn out. The settings are split into Flavor (to bring flavor to the forefront), Cloud (to give you bigger clouds), and Battery (for battery conservation). This mod also has upgradeable firmware so you can always be up to date.

Now let's talk about the GENE.FIT housed in the device. Not only does it have the fast firing, stability, and safety of the previous GENE chip, but the FIT chip also has V0 fireproofing which protects it from dust, liquid, and burnout.

Coming in at 88.3 mm x 51 mm x 26.5 mm, its slightly smaller than its big brother, but not by much. Its body is made of durable zinc alloy, giving it the durability to take a tumble and keep on vaping. Lastly, the Drag 2 has a large intuitive OLED screen that is super clear and easy to navigate.

We can’t forget about the tank, can we? The UForce T2 has a 28 mm wide base with a 5 mL bubble glass pre-installed. This tank comes with a  pre-installed U2 coil rated for 0.4 ohm with a range of 40w-80w, an N3 coil rated for .2 ohm with a range of 65w-100w and a spare 3.5 mL glass. Fill ports for this atomizer are located at the top with a push-to-open mechanism making for easy refilling of your tank with vape juice. The UForce also has monstrous airflow with 3 fully adjustable large airflow holes located at the bottom of the tank.

In short, the Voopoo Drag 2 kit is a worthy upgrade to its predecessor; improving the device in nearly every way and providing a great vaping experience with every...well...drag!

Drag 2 Specs:

• Size 88.3 mm x 51 mm x 26.5 mm
• Weight: 158g
• Watt Output Range: 5w-177w
• Volt Output Range: 0v-7.5v
• Resistance Range:
• Non-TC Wire - 0.05-5 ohms
• TC Wire - 0.05-1.5 ohms
• Temperature Range: 200-600°F
• Input charging voltage: 5v( ±.25)
• Output charging voltage: 1800 mA (±5%)
• GENE.FIT chip
• Fast firing
• Consistent Power
• Built-in safties
• V0 Fireproofing
• Requires 2 high Amperage 18650 batteries (not included) 

Drag 2 Features:

• Temperature Control:
• Stainless Steel
• Nichrome
• Titanium
• Connect to the app to unlock NC and TC wire modes
• Fit Mode:
• Cloud set
• Flavor set
• Battery set
• Large fire button
• 2 adjustment buttons
• A clear intuitive OLED screen
• 510 Connection
• Zinc alloy construction
• Beautiful Resin  inlay
• Magnetic Battery Door
• Built-in protections:
• 10-second timeout protection
• Short circuit protection
• Overheat protection
• Overcharge protection
• Over-Discharge protection
• Reverse Battery Protection
• Micro USB charger port
• Available colors: Scarlet, Dawn, Ink, and Flame

UForce T2 Tank Specs & Features:

• Size : 28mm x 54.45mm
• Capacity: 5mL (3.5 mL spare glass)
• Pyrex reinforced glass
• Stainless steel Construction
• 24K gold plated 510 connection
• Colorful 510 Widebore Drip Tip
• Push-to-open top fill
• 3 Fully adjustable bottom airflow holes
• UForce OCC Coils:
• U2 Dual Mesh Coil (.4 ohm - 40w-80w)
• N3 Triple Mesh Coil ( .2 ohm - 65w-100w)

What’s in the box:

• 1 x  Voopoo DRAG 2 177W Mod
• 1 x  UForce T2 Sub-Ohm Tank
• 1 x 5 mL Bubble Glass (pre-installed)
• 1 x  3.5 mL Spare Glass
• 1 x  0.4 ohm U2 Dual Coil (pre-installed)
• 1 x  0.2 ohm N3 Triple Mesh Coil
• 1 x  Micro USB
• 1 x Spare Parts Bag
• 1 x  Instructional Manual
• 1 x  Warranty Card